ENTTEC D-SPLIT DMX512 4-Port 3-Pin Opto-Isolated Splitter Repeater

ENTTEC D-SPLIT DMX512 4-Port 3-Pin Opto-Isolated Splitter Repeater

The ENTTEC D-SPLIT is a DMX512 optical splitter and repeater designed to distribute one DMX signal to four separate lighting lines. It re-buffers and duplicates the incoming signal, allowing each output to start its own DMX fixture chain.

This is the 3-pin output version, as identified on the package label. The unit provides four optically isolated DMX outputs to help protect connected equipment from stray voltage and faults on other DMX lines. It supports one DMX universe with up to 512 channels. RDM is not supported.

Specifications:

* Brand: ENTTEC

* Product: D-SPLIT DMX splitter/repeater

* Output configuration: 4 × 3-pin DMX outputs

* DMX inputs: 3-pin and 5-pin male input connectors; connect one DMX source at a time

* Protocol: DMX512

* Capacity: 512 channels / 1 universe

* Optical isolation: Up to 1000V protection against stray voltage

* Power input: 7–24V DC

* Maximum current: 400mA

* Pinout: Pin 1 = 0V, Pin 2 = Data−, Pin 3 = Data+

* RDM compatible: No

* Enclosure: ABS plastic

* Protection rating: IP20, indoor use

* Dimensions: 116 × 87 × 52 mm

* Unit weight: Approximately 0.16 kg

* Made in Australia